RAPS 10-15 kW Specs - Power Solutions Australia

power solutions australia
Redirecting to Selectronic... Click here if you are not redirected within 5 seconds.

RAPS Inverter Specifications

Model	RAP-10-108 RAP-10-120	RAP-12-108 RAP-12-120	RAP-15-120
Input voltages	108 / 120 VDC	108 / 120 VDC	120 VDC
Output voltage & frequency*	240 Vac 50 or 60 Hz	240 Vac 50 or 60 Hz	240 Vac 50 or 60 Hz
Continuous output @ 40°C	10 kW	12 kW	15 kW
1 hour rating @ 40°C	12 kW	14 kW	18 kW
½ hour rating @ 40°C	13 kW	15.6 kW	19.5 kW
Surge rating	22 kW	22 kW	30 kW
Maximum charge current	70 A	80 A	100 A
Peak efficiency	> 94 %	> 93 %	> 93 %
Power factor range	0 - 1	0 - 1	0 - 1
Idle power	100 W	120 W	150 W
Standby power	30 W	30 W	30 W
Autostart on demand	Yes	Yes	Yes
Mimimum start load	12 - 15 W	12 - 15 W	12 - 15 W
Integrated isolation AC/DC	cct breaker	cct breaker	cct breaker
Indicators	LED & LCD	LED & LCD	LED & LCD
Inverter mass	260 kg	260 kg	280 kg
Cooling system	5 fans	5 fans	5 fans
Data logging	Yes	Yes	Yes
Internal DC cct breaker	Yes	Yes	Yes
Internal Gen contactor	20 kVA	20 kVA	20 kVA
Remote access	RS232	RS232	RS232

Automatic Bypass: Supply is maintained by the generator if the inverter is off line.
Data Logging Remote Access: Standard data logging and remote access via modem, satellite, GSM and CDMA technology.
Cooling: Convection and thermostatically controlled fans.
Enclosures: Electronics IP50, transformer and heatsink IP23. Weatherproof enclosures or rack mounting are available on request.
Protection: Over current trip, over voltage, over temperature, reverse polarity, fast electronic trip, transient over voltage protection.

All inverters are designed to AS3100 / AS2604 / AS61000.3.5 and the draft AS/NZ standard for grid connect inverters.

*AC output voltages of 110, 120, 220 and 230 are available on application.
* DC operating voltage range 92% to 130% of nominal.

RAPS Inverter Specifications